|
🛠Firmware / Klipper / Portal: How to Post Technical Issues
|
|
0
|
6
|
March 7, 2026
|
|
The portal has been updated
|
|
0
|
11
|
September 25, 2026
|
|
Can't get the Link PIN: checking iDryer firmware and reflashing Link
|
|
5
|
26
|
August 27, 2026
|
|
Test theme for testing
|
|
0
|
6
|
August 16, 2026
|
|
Google Play requirements for a closed Android app beta test
|
|
7
|
6
|
March 28, 2026
|
|
Setting up a Telegram bot on a printer without a stable VPN: MTProxy and network limits
|
|
7
|
19
|
March 26, 2026
|
|
Why Wi‑Fi on the ESP starts only when it’s connected to a computer
|
|
4
|
11
|
March 17, 2026
|
|
ESP32 Link: after connecting to TX/RX, Wi‑Fi disappears; it turned out to be a wiring/GPIO mix-up
|
|
18
|
18
|
March 17, 2026
|
|
Can the device run without a screen via ESP32-C3 and the cloud
|
|
4
|
10
|
March 8, 2026
|
|
Board not detected in Klipper: do I need 220V and which MCU firmware is compatible
|
|
7
|
9
|
March 1, 2026
|
|
Do I need to rebuild the standalone firmware to change the trigger threshold
|
|
5
|
10
|
February 28, 2026
|
|
The board is detected, but after PID tuning the firmware stops booting and the USB device disappears
|
|
2
|
3
|
February 28, 2026
|
|
K1/K2 don’t see iHeater: flashing old Klipper and a prebuilt binary helped
|
|
10
|
10
|
February 28, 2026
|
|
Flashing iHeater with Klipper and Catapult/DFU mode
|
|
6
|
5
|
February 28, 2026
|
|
Klipper does not see iHeater over USB on the Creality K2
|
|
16
|
24
|
February 28, 2026
|
|
AutoPID freezes, question about the number of scales and saving settings
|
|
3
|
4
|
February 26, 2026
|
|
Telemetry, nice graphs, and iDryer Link for portal integration
|
|
5
|
9
|
February 23, 2026
|
|
After flashing 44/45 the screen stays blank; advice is to wait and use the web flasher
|
|
8
|
14
|
February 10, 2026
|
|
Which SBC to choose as a printer host: BTT Pi, Orange Pi Zero 3, or Orange Pi 4 Pro
|
|
2
|
9
|
February 4, 2026
|
|
iDryer firmware: AutoPID, scales, and adding presets after assembly
|
|
7
|
12
|
February 2, 2026
|
|
Standalone firmware for Unit: coming soon, upgrade without kits and network control
|
|
4
|
19
|
January 26, 2026
|
|
What standalone mode means for iDryer Unit and how it differs from the Klipper version
|
|
8
|
11
|
January 26, 2026
|
|
Klipper: TEMPERATURE_WAIT blocks delayed_gcode for the dryer on one host
|
|
4
|
6
|
January 20, 2026
|
|
Can Arduino be flashed over USB after flashing via USBasp
|
|
2
|
5
|
January 19, 2026
|
|
USBasp alternatives: ESP32, Blue Pill, and buying a programmer
|
|
2
|
7
|
January 7, 2026
|
|
How to flash Arduino without USBasp: can ESP32, JTAG, or something else be used
|
|
4
|
5
|
January 7, 2026
|
|
Problem connecting the iDryer second MCU and serial paths in Klipper
|
|
9
|
11
|
December 27, 2025
|
|
How to set up groups and macro display in Fluidd/Mainsail
|
|
6
|
13
|
December 21, 2025
|
|
PyUnit v2.0.0: release link and a request to add screenshots to the description
|
|
3
|
9
|
December 16, 2025
|
|
Assembled the system and tweaked a few macros to my taste
|
|
1
|
4
|
December 15, 2025
|