# Standalone firmware for Unit: coming soon, upgrade without kits and network control

**URL:** <https://forum.idryer.org/t/standalone-firmware-for-unit-coming-soon-upgrade-without-kits-and-network-control/1652>\
**Category:** Firmware / Klipper / Portal\
**Created:** [January 26, 2026, 9:41am UTC](https://forum.idryer.org/t/standalone-firmware-for-unit-coming-soon-upgrade-without-kits-and-network-control/1652 "2026-01-26T09:41:47Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\
**Post date:** [January 26, 2026, 9:41am UTC](https://forum.idryer.org/t/standalone-firmware-for-unit-coming-soon-upgrade-without-kits-and-network-control/1652/1 "2026-01-26T09:41:47Z")

</div>

The standalone firmware works. It’s already as sane as it can be), getting everything ready for release. A week or two, hopefully)  
And it already knows how to work over Wi-Fi. You need an esp32 super mini.

> **🇷🇺 Оригинал**
>
> Standalone прошивка работает. Уже максимально адекватно), готовлю все к публикации. Неделя-две, надеюсь)  
> И оно уже умеет работать с вифи. Нужна esp32 super mini.

---

<div class="post-metadata">

**Author:** ![ivan\_409](https://forum.idryer.org/letter_avatar_proxy/v4/letter/i/9fc348/32.png) [@ivan\_409](https://forum.idryer.org/u/ivan_409)\
**Post date:** [January 26, 2026, 9:43am UTC](https://forum.idryer.org/t/standalone-firmware-for-unit-coming-soon-upgrade-without-kits-and-network-control/1652/2 "2026-01-26T09:43:12Z")

</div>

So basically it’s easier to wait and then upgrade a simple assembled unit to standalone?

> **🇷🇺 Оригинал**
>
> То есть проще подождать и уже юнит простой собранный до standalone апнуть?

---

<div class="post-metadata">

**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\
**Post date:** [January 26, 2026, 9:44am UTC](https://forum.idryer.org/t/standalone-firmware-for-unit-coming-soon-upgrade-without-kits-and-network-control/1652/3 "2026-01-26T09:44:55Z")

</div>

I’m sure it is. Kits aren’t needed either. In principle, you can already use it without a screen), but for now only if you have internet. I’m planning offline too, but no idea when.

> **🇷🇺 Оригинал**
>
> Я уверен, что да. Киты и не нужны. В принципе уже можно и без экрана юзать), но пока только при наличии интернета. Без тырнета тоже планирую, но хз когда.

---

<div class="post-metadata">

**Author:** ![ivan\_409](https://forum.idryer.org/letter_avatar_proxy/v4/letter/i/9fc348/32.png) [@ivan\_409](https://forum.idryer.org/u/ivan_409)\
**Post date:** [January 26, 2026, 9:47am UTC](https://forum.idryer.org/t/standalone-firmware-for-unit-coming-soon-upgrade-without-kits-and-network-control/1652/4 "2026-01-26T09:47:15Z")

</div>

And without a screen, how?  
Control it from the printer or over the network?

> **🇷🇺 Оригинал**
>
> А без экрана, как?  
> Управлять с принтера или по сети?

---

<div class="post-metadata">

**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\
**Post date:** [January 26, 2026, 10:11am UTC](https://forum.idryer.org/t/standalone-firmware-for-unit-coming-soon-upgrade-without-kits-and-network-control/1652/5 "2026-01-26T10:11:33Z")

</div>

Like this  
 ![](https://forum.idryer.org/uploads/default/original/2X/9/9f85a9d5f162151cdb8b6bdb7984347b47a06c7b.jpeg)

> **🇷🇺 Оригинал**
>
> вот так  
> ![](https://forum.idryer.org/uploads/default/original/2X/9/9f85a9d5f162151cdb8b6bdb7984347b47a06c7b.jpeg)