# Slim iHeater/iFilter for K1: a 2-in-1 idea and flow layout **URL:** \ **Category:** Feature Requests\ **Created:** [February 3, 2025, 7:30am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744 "2025-02-03T07:30:07Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![slako\_34](https://forum.idryer.org/letter_avatar_proxy/v4/letter/s/4bbf92/32.png) [@slako\_34](https://forum.idryer.org/u/slako_34)\ **Post date:** [February 3, 2025, 7:30am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/1 "2025-02-03T07:30:07Z")
I’d really like a slim iHeater with filtration. For the K1 😀 > **🇷🇺 Оригинал** > > Хочицца слим iHeater с фильтрацией. Для K1 😀 ---
**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\ **Post date:** [February 3, 2025, 7:30am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/2 "2025-02-03T07:30:38Z")
It’s called iFilter) [iz chata] > **🇷🇺 Оригинал** > > iFilter зовут) [iz chata] ---
**Author:** ![slako\_34](https://forum.idryer.org/letter_avatar_proxy/v4/letter/s/4bbf92/32.png) [@slako\_34](https://forum.idryer.org/u/slako_34)\ **Post date:** [February 3, 2025, 7:52am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/3 "2025-02-03T07:52:50Z")
I’d like a 2-in-1 iFilter+iHeater in a slim form factor, there’s really not much room in the K1 > **🇷🇺 Оригинал** > > хочется 2 в одном iFilter+iHeater в слим исполнениии, в К1 совсем туго с местом ---
**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\ **Post date:** [February 3, 2025, 7:57am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/4 "2025-02-03T07:57:06Z")
Go ahead and design it) Though really, putting the filter under the bed is a compromise — the hot air with VOCs rises upward, even if it does get mixed around > **🇷🇺 Оригинал** > > Рисуй) > На самом деле размещение фильтра под столом это компромисс, горячий воздух с VOC поднимается вверх, хоть и перемешивается ---
**Author:** ![slako\_34](https://forum.idryer.org/letter_avatar_proxy/v4/letter/s/4bbf92/32.png) [@slako\_34](https://forum.idryer.org/u/slako_34)\ **Post date:** [February 3, 2025, 7:58am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/5 "2025-02-03T07:58:53Z")
Yeah, I put off drawing it till the end, figured maybe you’d come up with something yourselves by release time. Not because I’m lazy, but because you and Alexey are super-brains) > **🇷🇺 Оригинал** > > Да, рисовать на последок отложил, думал вдруг вы решите что-то сами к релизу. Не потому что я ленивый, а потому что вы с Алексеем это супермозг) ---
**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\ **Post date:** [February 3, 2025, 8:03am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/6 "2025-02-03T08:03:28Z")
Only @gungrel ([https://t.me/gungrel](https://t.me/gungrel)) is working on the iHeater корпус, so find an approach 😉 > **🇷🇺 Оригинал** > > Корпусом iHeater исключительно @gungrel ([https://t.me/gungrel](https://t.me/gungrel)) занимается, ищи подход;) ---
**Author:** ![alderpaw\_247](https://forum.idryer.org/letter_avatar_proxy/v4/letter/a/ecd19e/32.png) [@alderpaw\_247](https://forum.idryer.org/u/alderpaw_247)\ **Post date:** [February 3, 2025, 8:08am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/7 "2025-02-03T08:08:19Z")
I had some ideas for designing a vertical body for the sixth Bear: air intake with a big blower fan from the top, closer to the nozzle, and warm air exhaust from the bottom, under the bed > **🇷🇺 Оригинал** > > У меня были идеи по рисованию вертикальной тушки под шестого медведя, забор воздуха большой улиткой сверху, ближе к соплу, выброс прогретого снизу, под стол ---
**Author:** ![ivan\_sorokin\_274](https://forum.idryer.org/letter_avatar_proxy/v4/letter/i/7bcc69/32.png) [@ivan\_sorokin\_274](https://forum.idryer.org/u/ivan_sorokin_274)\ **Post date:** [February 3, 2025, 8:14am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/8 "2025-02-03T08:14:40Z")
And where’s the filter in that setup? > **🇷🇺 Оригинал** > > А фильтр есть в этой схеме? ---
**Author:** ![slako\_34](https://forum.idryer.org/letter_avatar_proxy/v4/letter/s/4bbf92/32.png) [@slako\_34](https://forum.idryer.org/u/slako_34)\ **Post date:** [February 3, 2025, 8:26am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/9 "2025-02-03T08:26:31Z")
So basically you need intake from the top, then the filter, then the heater, and exhaust downward. And you need a properly sized blower fan (or two) that can push all that from the top > **🇷🇺 Оригинал** > > Получается нужен забор сверху, потом фильтр, потом нагреватель и выхлоп вниз. И нужна соразмерная улитка (или две) которая сверху это всё протолкнёт ---
**Author:** ![alderpaw\_247](https://forum.idryer.org/letter_avatar_proxy/v4/letter/a/ecd19e/32.png) [@alderpaw\_247](https://forum.idryer.org/u/alderpaw_247)\ **Post date:** [February 3, 2025, 8:29am UTC](https://forum.idryer.org/t/slim-iheater-ifilter-for-k1-a-2-in-1-idea-and-flow-layout/744/10 "2025-02-03T08:29:06Z")
Could probably squeeze it in between the heater and the blower fan, I’ll think about it > **🇷🇺 Оригинал** > > Можно впихнуть между нагревателем и улиткой, подумаю