# Routing RJ45 and the cable channel in UNIT\_MCU\_base\_plain

**URL:** <https://forum.idryer.org/t/routing-rj45-and-the-cable-channel-in-unit-mcu-base-plain/1657>\
**Category:** General Discussion\
**Created:** [January 31, 2026, 5:56pm UTC](https://forum.idryer.org/t/routing-rj45-and-the-cable-channel-in-unit-mcu-base-plain/1657 "2026-01-31T17:56:36Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![max\_makov\_462](https://forum.idryer.org/letter_avatar_proxy/v4/letter/m/7c8e57/32.png) [@max\_makov\_462](https://forum.idryer.org/u/max_makov_462)\
**Post date:** [January 31, 2026, 5:56pm UTC](https://forum.idryer.org/t/routing-rj45-and-the-cable-channel-in-unit-mcu-base-plain/1657/1 "2026-01-31T17:56:36Z")

</div>

But the RJ45 from the screen runs through here, right? I can’t figure out where it goes after that)  
 ![](https://forum.idryer.org/uploads/default/original/2X/6/69331d0873e34cf40f5300c5baffd65b26c54e06.jpeg)

> **🇷🇺 Оригинал**
>
> А вот тут же идёт rj45 от экрана? Не пойму куда он девается дальше)  
> ![](https://forum.idryer.org/uploads/default/original/2X/6/69331d0873e34cf40f5300c5baffd65b26c54e06.jpeg)

---

<div class="post-metadata">

**Author:** ![ivan\_vorotnikov\_394](https://forum.idryer.org/letter_avatar_proxy/v4/letter/i/f0a364/32.png) [@ivan\_vorotnikov\_394](https://forum.idryer.org/u/ivan_vorotnikov_394)\
**Post date:** [January 31, 2026, 6:10pm UTC](https://forum.idryer.org/t/routing-rj45-and-the-cable-channel-in-unit-mcu-base-plain/1657/2 "2026-01-31T18:10:16Z")

</div>

Then you just break it out further.

And one big cover plate closes off the whole channel.

> **🇷🇺 Оригинал**
>
> Так дальше выламывается.
> 
> И одна большая заглушка закрывает весь канал.

---

<div class="post-metadata">

**Author:** ![max\_makov\_462](https://forum.idryer.org/letter_avatar_proxy/v4/letter/m/7c8e57/32.png) [@max\_makov\_462](https://forum.idryer.org/u/max_makov_462)\
**Post date:** [January 31, 2026, 6:14pm UTC](https://forum.idryer.org/t/routing-rj45-and-the-cable-channel-in-unit-mcu-base-plain/1657/3 "2026-01-31T18:14:19Z")

</div>

Could you point me in the right direction, please?  
 ![](https://forum.idryer.org/uploads/default/original/2X/4/4eeb67b3dac6088356a2abe25adaa67b37fad7c5.jpeg)

![](https://forum.idryer.org/uploads/default/original/2X/b/bc3c528bd4d52dea244318e7de1542ecc47962d7.jpeg)

> **🇷🇺 Оригинал**
>
> Можешь ткунь меня носом, пожалуйста?  
> ![](https://forum.idryer.org/uploads/default/original/2X/4/4eeb67b3dac6088356a2abe25adaa67b37fad7c5.jpeg)
> 
> ![](https://forum.idryer.org/uploads/default/original/2X/b/bc3c528bd4d52dea244318e7de1542ecc47962d7.jpeg)

---

<div class="post-metadata">

**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\
**Post date:** [January 31, 2026, 6:25pm UTC](https://forum.idryer.org/t/routing-rj45-and-the-cable-channel-in-unit-mcu-base-plain/1657/4 "2026-01-31T18:25:16Z")

</div>

Where did you get that?

Yeah, no problem)))  
 ![](https://forum.idryer.org/uploads/default/original/2X/9/987cead07b8d086d72392d4b9880e44242473996.jpeg)

> **🇷🇺 Оригинал**
>
> Где ты это взял?
> 
> Да без проблем)))  
> ![](https://forum.idryer.org/uploads/default/original/2X/9/987cead07b8d086d72392d4b9880e44242473996.jpeg)

---

<div class="post-metadata">

**Author:** ![max\_makov\_462](https://forum.idryer.org/letter_avatar_proxy/v4/letter/m/7c8e57/32.png) [@max\_makov\_462](https://forum.idryer.org/u/max_makov_462)\
**Post date:** [January 31, 2026, 6:29pm UTC](https://forum.idryer.org/t/routing-rj45-and-the-cable-channel-in-unit-mcu-base-plain/1657/5 "2026-01-31T18:29:35Z")

</div>

So UNIT\_MCU\_base\_plain (just checked the STL) doesn’t have a channel. What are the options for routing the cable without reprinting? I don’t think there are any pretty ones.

> **🇷🇺 Оригинал**
>
> Получается, UNIT\_MCU\_base\_plain (только что stl проверил) без канала. Какие есть варианты прокинуть кабель, не перепечатывая? Красивых, думаю, нет

---

<div class="post-metadata">

**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\
**Post date:** [January 31, 2026, 6:34pm UTC](https://forum.idryer.org/t/routing-rj45-and-the-cable-channel-in-unit-mcu-base-plain/1657/6 "2026-01-31T18:34:14Z")

</div>

idk, you could print the supports a bit taller and that’s it

> **🇷🇺 Оригинал**
>
> хз, можно опоры напечатать повыше и все

---

<div class="post-metadata">

**Author:** ![ivan\_vorotnikov\_394](https://forum.idryer.org/letter_avatar_proxy/v4/letter/i/f0a364/32.png) [@ivan\_vorotnikov\_394](https://forum.idryer.org/u/ivan_vorotnikov_394)\
**Post date:** [February 1, 2026, 10:02am UTC](https://forum.idryer.org/t/routing-rj45-and-the-cable-channel-in-unit-mcu-base-plain/1657/7 "2026-02-01T10:02:40Z")

</div>

Sorry…  
One option 🙃  
 ![](https://forum.idryer.org/uploads/default/original/2X/6/64a107b888a42f700d5d20c1c8886f18d2859111.jpeg)

> **🇷🇺 Оригинал**
>
> Извините…..  
> Как вариант 🙃  
> ![](https://forum.idryer.org/uploads/default/original/2X/6/64a107b888a42f700d5d20c1c8886f18d2859111.jpeg)