# Problem with STL dimensions after export and fix status

**URL:** <https://forum.idryer.org/t/problem-with-stl-dimensions-after-export-and-fix-status/1499>\
**Category:** Print Quality Issues\
**Created:** [September 25, 2025, 12:07pm UTC](https://forum.idryer.org/t/problem-with-stl-dimensions-after-export-and-fix-status/1499 "2025-09-25T12:07:22Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\
**Post date:** [September 25, 2025, 12:07pm UTC](https://forum.idryer.org/t/problem-with-stl-dimensions-after-export-and-fix-status/1499/1 "2025-09-25T12:07:22Z")

</div>

If you still haven’t had a laugh over the STL export, you’d better hurry up)))  
and honestly, when exporting I didn’t even pay attention to it, but the dimensions do shift a bit, by less than a tenth, though it’s there  
 ![](https://forum.idryer.org/uploads/default/original/2X/a/a914007b25a63a7efa86a68df7f354127d4eaa5f.jpeg)

> **🇷🇺 Оригинал**
>
> Ну кто еще не поржал с экспорта стл, то скоро и не успеете)))  
> а вообще при экспорте, я даже не обращал внимание на это, уходят размеры, чуть, на меньше сотки, но есть  
> ![](https://forum.idryer.org/uploads/default/original/2X/a/a914007b25a63a7efa86a68df7f354127d4eaa5f.jpeg)

---

<div class="post-metadata">

**Author:** ![yuriy\_belkin\_133](https://forum.idryer.org/letter_avatar_proxy/v4/letter/y/f14d63/32.png) [@yuriy\_belkin\_133](https://forum.idryer.org/u/yuriy_belkin_133)\
**Post date:** [September 25, 2025, 12:08pm UTC](https://forum.idryer.org/t/problem-with-stl-dimensions-after-export-and-fix-status/1499/2 "2025-09-25T12:08:02Z")

</div>

Will there be some info somewhere that the STLs have been fixed and are good to print?

> **🇷🇺 Оригинал**
>
> А будет где то информация, что стл поправлены и можно печатать?

---

<div class="post-metadata">

**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\
**Post date:** [September 25, 2025, 12:10pm UTC](https://forum.idryer.org/t/problem-with-stl-dimensions-after-export-and-fix-status/1499/3 "2025-09-25T12:10:25Z")

</div>

Print the STPs)  
the STLs are already fixed

> **🇷🇺 Оригинал**
>
> степы печатай)  
> стл уже поправлены

---

<div class="post-metadata">

**Author:** ![yuriy\_belkin\_133](https://forum.idryer.org/letter_avatar_proxy/v4/letter/y/f14d63/32.png) [@yuriy\_belkin\_133](https://forum.idryer.org/u/yuriy_belkin_133)\
**Post date:** [September 25, 2025, 12:10pm UTC](https://forum.idryer.org/t/problem-with-stl-dimensions-after-export-and-fix-status/1499/4 "2025-09-25T12:10:56Z")

</div>

So I can already download and print, right?

> **🇷🇺 Оригинал**
>
> Уже могу выгружать и печатать, верно?

---

<div class="post-metadata">

**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\
**Post date:** [September 25, 2025, 12:13pm UTC](https://forum.idryer.org/t/problem-with-stl-dimensions-after-export-and-fix-status/1499/5 "2025-09-25T12:13:32Z")

</div>

Just not the archive yet

a… actually, the archive too now, yeah)

> **🇷🇺 Оригинал**
>
> Только архив еще нет
> 
> а… уже и архив да)

---

<div class="post-metadata">

**Author:** ![yuriy\_belkin\_133](https://forum.idryer.org/letter_avatar_proxy/v4/letter/y/f14d63/32.png) [@yuriy\_belkin\_133](https://forum.idryer.org/u/yuriy_belkin_133)\
**Post date:** [September 25, 2025, 12:14pm UTC](https://forum.idryer.org/t/problem-with-stl-dimensions-after-export-and-fix-status/1499/6 "2025-09-25T12:14:45Z")

</div>

Thanks! [korotkoe soobshchenie iz chata]

> **🇷🇺 Оригинал**
>
> Спасибо! [korotkoe soobshchenie iz chata]