# K1/K2 don’t see iHeater: flashing old Klipper and a prebuilt binary helped **URL:** \ **Category:** Firmware / Klipper / Portal\ **Created:** [February 28, 2026, 2:24pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704 "2026-02-28T14:24:01Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![vladislaw\_334](https://forum.idryer.org/letter_avatar_proxy/v4/letter/v/e8c25b/32.png) [@vladislaw\_334](https://forum.idryer.org/u/vladislaw_334)\ **Post date:** [February 28, 2026, 2:24pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/1 "2026-02-28T14:24:01Z")
My K1 also doesn’t see the heater as a USB device I also compiled the firmware on another host with my own version of Klipper > **🇷🇺 Оригинал** > > у меня тоже к1 не видит хитер как юсб устройство > > прошивку тоже компилил на другом хосте со своей версией клиппера ---
**Author:** ![ruslan\_p\_261](https://forum.idryer.org/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@ruslan\_p\_261](https://forum.idryer.org/u/ruslan_p_261)\ **Post date:** [February 28, 2026, 2:58pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/2 "2026-02-28T14:58:44Z")
I don’t really know my way around your Creality stuff. If it doesn’t see it, there are two options: either @Tom\_Tomich ([https://t.me/Tom\_Tomich](https://t.me/Tom_Tomich)) or go read through his manuals 🙂 > **🇷🇺 Оригинал** > > Я не понимаю в ваших креалити. Если не видит тут два путя, или @Tom\_Tomich ([https://t.me/Tom\_Tomich](https://t.me/Tom_Tomich)) или курить его же мануалы) ---
**Author:** ![vladislaw\_334](https://forum.idryer.org/letter_avatar_proxy/v4/letter/v/e8c25b/32.png) [@vladislaw\_334](https://forum.idryer.org/u/vladislaw_334)\ **Post date:** [February 28, 2026, 2:59pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/3 "2026-02-28T14:59:28Z")
Just hooked up the heater that I flashed for the FF and it worked) gonna look for that binary > **🇷🇺 Оригинал** > > щас подключил грелку, которую под фф шил > > и она заработала) буду искать тот бинарник ---
**Author:** ![tom\_tomich\_503](https://forum.idryer.org/letter_avatar_proxy/v4/letter/t/b2d939/32.png) [@tom\_tomich\_503](https://forum.idryer.org/u/tom_tomich_503)\ **Post date:** [February 28, 2026, 3:01pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/4 "2026-02-28T15:01:02Z")
For the K1 to see it, you need to compile the firmware for 2022 Klipper. > **🇷🇺 Оригинал** > > Чтобы к1 видел надо компилить прошивку под клиппер 22 года. ---
**Author:** ![ilya\_borisov\_480](https://forum.idryer.org/letter_avatar_proxy/v4/letter/i/5f9b8f/32.png) [@ilya\_borisov\_480](https://forum.idryer.org/u/ilya_borisov_480)\ **Post date:** [February 28, 2026, 3:21pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/5 "2026-02-28T15:21:26Z")
Any idea what to do with the K2? > **🇷🇺 Оригинал** > > А что делать с к2 не знаешь? ---
**Author:** ![tom\_tomich\_503](https://forum.idryer.org/letter_avatar_proxy/v4/letter/t/b2d939/32.png) [@tom\_tomich\_503](https://forum.idryer.org/u/tom_tomich_503)\ **Post date:** [February 28, 2026, 3:38pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/6 "2026-02-28T15:38:22Z")
As far as I remember, it’s the same thing as with the K1 > **🇷🇺 Оригинал** > > Насколько я помню тоже самое что и с к1 ---
**Author:** ![ilya\_borisov\_480](https://forum.idryer.org/letter_avatar_proxy/v4/letter/i/5f9b8f/32.png) [@ilya\_borisov\_480](https://forum.idryer.org/u/ilya_borisov_480)\ **Post date:** [February 28, 2026, 3:41pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/7 "2026-02-28T15:41:15Z")
And is there only one 2022 Klipper there, or do I need some specific one? > **🇷🇺 Оригинал** > > А там клипер 22 года только один или нужен какой то конкретный? ---
**Author:** ![tom\_tomich\_503](https://forum.idryer.org/letter_avatar_proxy/v4/letter/t/b2d939/32.png) [@tom\_tomich\_503](https://forum.idryer.org/u/tom_tomich_503)\ **Post date:** [February 28, 2026, 4:00pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/8 "2026-02-28T16:00:13Z")
12.043, I think — basically as long as it’s 12 > **🇷🇺 Оригинал** > > 12.043 вроде по большому счету лишь бы 12 ---
**Author:** ![ilya\_borisov\_480](https://forum.idryer.org/letter_avatar_proxy/v4/letter/i/5f9b8f/32.png) [@ilya\_borisov\_480](https://forum.idryer.org/u/ilya_borisov_480)\ **Post date:** [February 28, 2026, 4:02pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/9 "2026-02-28T16:02:39Z")
Got it, thanks a lot > **🇷🇺 Оригинал** > > Понял спасибо большое ---
**Author:** ![vladislaw\_334](https://forum.idryer.org/letter_avatar_proxy/v4/letter/v/e8c25b/32.png) [@vladislaw\_334](https://forum.idryer.org/u/vladislaw_334)\ **Post date:** [February 28, 2026, 4:06pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/10 "2026-02-28T16:06:53Z")
Here, take this [file: klipper.bin (not included in export)] > **🇷🇺 Оригинал** > > держи [file: klipper.bin (not included in export)] ---
**Author:** ![ilya\_borisov\_480](https://forum.idryer.org/letter_avatar_proxy/v4/letter/i/5f9b8f/32.png) [@ilya\_borisov\_480](https://forum.idryer.org/u/ilya_borisov_480)\ **Post date:** [February 28, 2026, 4:07pm UTC](https://forum.idryer.org/t/k1-k2-don-t-see-iheater-flashing-old-klipper-and-a-prebuilt-binary-helped/1704/11 "2026-02-28T16:07:30Z")
Oooh, thank you [iz chata] > **🇷🇺 Оригинал** > > Ооо благодарю [iz chata]